ReefBreeders Pico LED V2 – Freshwater

ReefBreeders Pico LED V2 – FreshwaterThe new and improved ReefBreeders Pico LED V2 has been redesigned to be user-friendly with advanced features and twice the power of the V1.The Pico LED V2 has 15watts of LED power and includes a built in two-channel dimmer and timer. Each channel can be dimmed in 10 percent increments for precise color control.The built in timer can be set to operate for eight, ten, or twelve hour run times. The timer is set at the desired time, and it will automatically shut off based on your selection.The Pico LED V2 is available in three spectrums, Reef, Refugium, and Freshwater/Display Refugium. Each Pico V2 includes an integrated gooseneck mount for aquarium trims/glass up to 1 inch thick.The light measures 3.4″ in diameter x 1.05″ thick with a 10″ gooseneck.SpectrumChannel AChannel BCoverage AreaSaltwater1 x 7500K Cool White1 x 420nm Violet1 x 480nm Cool Blue3 x 450nm Royal BlueSoft Corals/FOWLR: 24 x 24Mixed Reef: 18 x 18SPS: 12 x 12Refugium3 x 660nm Deep Red1 x 450nm Royal Blue2 x 660nm Deep RedMedium/low light algae: 24 x 24High Light Algae: 18 x 18Freshwater/Display Refugium3 x 3500K Warm White2 x 7500K Cool White1 x 450nm Royal BlueMedium/low light plants: 24 x 24High Light Plants: 18 x 18Instructions:Mount the light to your aquarium using the built in gooseneck mount. Secure the screws firmly, but do not over-tighten them.Plug the power supply into your light, then plug the power supply into the wall, in that order.Press the power button to turn your light on or off.Adjust the intensity and color spectrum by pressing A or B. Each press changes the output by 10%.If desired, set the timer to 8, 10, or 12 hours by pressing the clock icon, 1, 2, or 3 times. Make sure you set this at your desired on time. The light will automatically run for the prescribed time each day. For example, if you set your light to 8 hours at 9AM, it will shut off at 5PM, then turn back on at 9AM the next day.