Neptune Systems Apex TRIDENT (Alk, Cal, Mag) Monitoring Device (without reagents)

Neptune Systems Apex TRIDENT (Alk, Cal, Mag) Monitoring DeviceNOTE: This unit comes without reagentsFully Automated Alkalinity, Calcium, and Magnesium TestingSeamless Integration with Neptune Systems Apex ControllersPrecision Testing with Consistent, Repeatable ResultsTest Your Aquarium Water up to 24 Times Per DayApex Fusion Graphing, Alerts, and Automation SupportCompatible with Automatic Dosing Control When Paired with DSThe Neptune Systems Trident ACM is an automated testing device designed to continuously monitor alkalinity, calcium, and magnesium in saltwater reef aquariums. By removing the need for manual test kits, the Trident delivers consistent, high-frequency data that helps reef keepers better understand consumption trends, detect issues early, and maintain long-term stability.The Trident connects directly to a compatible Neptune Systems Apex controller and logs every test result into Apex Fusion, where results are graphed over time and can trigger alerts or automated actions. When paired with a Neptune Systems DS or DS QuietDrive dosing pump, the Trident becomes the foundation of a closed-loop testing and dosing system that can automatically adjust additive delivery to maintain target parameters.How it WorksThe Trident uses automated titration combined with an internal colourimeter to replicate the same chemical testing process used in manual hobby test kits, but with far greater consistency. On a scheduled basis, the Trident draws a small water sample from the aquarium, mixes it with reagent, and precisely measures the colour change using a controlled peristaltic pump system.Once the test is complete, the sample and reagent are expelled to an external waste container, and the measured value is logged into the Apex. This process repeats automatically based on the testing schedule you define.Apex Integration & AlertsAll Trident test results are displayed in Apex Fusion, where data is stored, graphed, and analysed over time. Users can configure alerts to notify them if alkalinity, calcium, or magnesium move outside of a defined safe range.Beyond notifications, Trident data can also be used to trigger automated responses such as pausing dosing, adjusting output, or activating other connected equipment to help protect the aquarium from instability.Automatic Dosing Control with Neptune DSWhen paired with one or more Neptune Systems DS dosing pumps, the Trident allows you to enable optional AutomaticDosing Control (ADC). ADC takes results from the Trident and uses them to gradually adjust what the DS delivers. Built-in safeguards protect your aquarium by comparing measured changes against dosing adjustments. Dosing changes are limited to 35% per adjustment. If no expected change is detected, ADC will shut down auto tuning, notify you, and revert to the original dosing levels.Setup & OperationInstallation is designed to be quick and straightforward. The Trident connects via a single cable to the Apex’s EB832 Power Bar, uses two lengths of tubing for sample intake and waste output, and is configured through guided setup tasks in Apex Fusion. No manual calibration, reagent mixing, or probe tuning is required.Testing is quiet and compact enough to run inside most aquarium cabinets without drawing attention.Compatible Neptune Systems Apex ControllersA3 Apex (Apex Pro, Apex, Apex Jr.*)A2 Apex (Apex, Apex EL)*Note: If you’re using an A3 Apex Jr., you’ll need a36W 24VDC Power SupplyandAquabus cable.Requires:Open 1Link port or 24V power supply + Aquabus cableNeptune Systems DS or DS QuietDrive required for automated dosingSpecificationsDimensions: 9.8″ x 12.4″ x 4.9″Alkalinity Precision: 0.05 dKHCalcium Precision: 15 ppmMagnesium Precision: 15 ppmTest Duration: Approximately 7 minutes per testSample Volume: ~8 mL per testMaximum Head Height: Must be less than 4 ft from water sourceWhat’s I