High Efficiency Antimicrobial Diffuser Tubing, 50′ Roll

High Efficiency Antimicrobial Diffuser Tubing, 50′ RollNew! Includes antimicrobial component to greatly reduce foulingsafe for fish!This patented, low-pressure rubber/polyethylene diffuser hose is made for aquaculture. Step on itit springs right back! This is efficient hose, with a pressure resistance of only 12″ of H2O at normal flow rates when new. Diffuser lengths of up to 20′ per inlet are possible at low airflow rates. Tubing has a good oxygen transfer rate and is compatible with both regenerative blowers and linear air pumps.The gas flow rate is an average of .1.5 cfm/ft; higher and lower flows are possible. Tubing produces a strong volume of medium-size bubbles (approximately 3 mm). For connections, use 1/2″ barb fittings with clamps. Hose ends may be heat-sealed or fitted with a plug and clamp. To counteract buoyancy, hold-downs or weights are required. For best results, the tubing should be oriented with the blue stripe on the bottom. Inside diameter is 1/2″ (13 mm); outside diameter is 1″ (25 mm). Made in the USA by Colorite Plastics.No warranty due to individual clogging and fouling possibilities.Note: Tubing is also known as a hose.