Abyzz Apex Interface

Abyzz 3rd-Party 0-10V Controller InterfaceConnect your Abyzz pump to a HYDROS WaveEngine 0-10V INPUT controller with this simple to install interface and use Fusion to do all your programming for 24-hour cycles, enable feed modes, and apply warnings and alarms.Connecting the Abyzz to Neptunes Apex Interface is very simple. All that is required is an open variable speed port on an Apex System or expansion module. The RJ45 connector will plug directly into the variable speed port on the APEX system, and then the serial port should be connected to the master socket of the Abyzz pump driver.NOTE: Not Compatible with Abyzz IPU PumpsSpecificationsRated Input -1w maxOperating Voltage – 5VDCRJ45 to Serial Cable Length – 60 inchesSerial to Serial Extension Cable Length – 72 inchesNOTE:Not Compatible with Abyzz IPU PumpsWhat’s Included?1x Serial to RJ45 Cable1x Serial to Serial Extension CableNOTE: Depending on your model of pump, a driver software update may be required. Also compatible with Neptune APEX Controller.Product code: 6221Item No. WP-AZ-APEXINT