Tunze Turbelle nanostream 6055

Tunze Turbelle nanostream 6055TUNZEHUB EDITIONFor aquariums from 40 to 500 liters (10.6 to 132USgal.).Flow rate: 1,000 to about 5,500 l/h (250 to about 1,450USgal./h) with TurbelleController 7020Energy consumption: 4 – 18 WPower supply unit: 100-240V / 50-60HzCable length: 3 m (118)Dimensions: 70 mm (2.7)Output: 40/15 mm (1.5/2/3)Magnet Holder with Silence clamp up to a glass thickness of 15 mm (2/3).TUNZE HUB EDITIONThe TUNZE HUB EDITION pumps can be controlled electronically and have been provided with a fish-care function. These pumps are equipped with the Turbelle Controller 7020 to adjust the pump performance and for access to the TUNZE HUB. Using this cloud solution, many devices from TUNZE and other manufacturers can be clearly controlled and regulated via WiFi and the Internet. An integrated real-time clock prevents time shifts due to power failure.nanostream designTurbelle nanostream electronic are speed-controlled pumps with a Turbelle controller operating on safety extra-low voltage, to be employed ideally in every aquarium from 40 to >1,000 liters (10 to >265 USgal.) for simulation of lapping waves or tidal currents. They contain a microprocessor-controlled motor and a Turbelle controller. The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. The pumps will be stopped immediately in case of blockage. After the blockage has been removed, the pumps will start up automatically after a delay of 20 seconds. The pump driver has been provided with a fish care function, which causes a revolution of the propeller every twenty seconds when the pump is at a standstill.Apart from that, the pumps can also connect to devices controlled by the SmartController via the TUNZE HUB.Safety extra-low voltage, blocking and…run-dry protection.Propeller technology